Ending A Call; During A Call; Sharing A Presentation 10 - Cisco EX60 User Manual

Ending a Call

To end a call, tap the End button or hang up the handset.

During a Call

During a call, the touch panel displays the call control buttons.
If your system supports multisite calling, this allows you to dial
Add
additional participants.
Presentation If a device is connected to the system this allows you to share
the video output (for example to share a presentation).
This provides access to the local camera control and settings
More
menus.
Touch Tones This provides access to a numerical keypad to issue touch tone
commands to the far end. This is useful if you need to interact
with an auto-attendant system.
This puts the current caller on hold while you dial another
Hold
system. You can then switch between the two callers.
This ends the call.
End
9
Sharing a Presentation
To share a presentation from a computer or laptop, you must first connect the
device to the video conferencing system. On laptops, simply plug the cable
supplied into the laptop and use the appropriate function key to change the
display settings.
For a desktop computer system, it is possible to use the video conferencing unit
as a PC monitor. Connect the cable to the video output of your computer, then
select the appropriate monitor settings on your PC. For help doing this, please
contact a member of your local support team. The EX90 supports video
resolutions up to 1920 x 1200.
When using the system as a PC monitor the unit will automatically switch
between the PC image and the video conference when a call is made.
2
1
Tap the Presentation button. This displays your PC image on screen but
1
does not send it.
Tap the Present button to start sending the presentation.
2
You can minimise your view of the presentation by
3
clicking the Minimize button.
To finish your presentation, tap the Stop
4
Presenting button
4
3
10