Remove The Packaging; Check Installation Hardware; Etape 2, Installation Du Cadre De Support Sup@Ieur - GE ZV855 Installation Instructions Manual

Installation Preparation
REMOVE THE PACKAGING
CAUTION:
Wear glovesto protect
againstsharp edges.
The vent hood ispacked with the duct cover and
support frames.
• Remove the hood, portsand packaging.
• Remove junctionbox cover.
• Install strain relief onto junctionbox cover
(notsupplied).
NOTE: Additional tools, materials and hardware ore
required to constructgour ceiling s upport.
Check Installation Hardware
Locate the hardware accessorg bag packed with the
hood and check contents.
,exhe iFIF
wood lag
screws
2 Phillips-head 4 Flat
(6 mmx 2-1/2"
or 1/4 x 2-1/2") duct cover washers
screws
2 Stopscrews
(Oneis in the service
manualenvelope.
Leavethat screwin
the envelope.)
............ i] t :
Supportframes
with 8 screws
and 8 washers
/o o'
,o Front of Hood %
\ O //
Template
Mountingscrew holes
\
Decorative
duct covers
3 Stainless
steel greasefilters
4 (10mm) Nuts
and lockwashers
._ 8 Frame
attachmentscrews
with washers
(attachedto
accessory support
frames)
L%:b
2 Utensilrodswith 4 machinescrews
Additional Parts for Recirculating Operation
Air deflectorwith upper
duct connectorand 4
small flat-headscrews
3 Charcoal f ilters