Blocking a User
Blocking a User
3.5.3
An alternative to deleting a User is blocking a User. This means that the
An alternative to deleting a
and password is stored, but the
and password is stored, but the User is unable to access the system.
To block a User:
1. In the Add User page (see
checkbox.
Editing User Information
3.5.4
You can change any of the following User
Password.
To edit User information
information:
1. In the Users page (see
The Edit User page appears, with the User's information in the parameters.
The Edit User page appears, with the User's information in the parameters.
The Edit User page appears, with the User's information in the parameters.
2. Change the Permission
Permission and/or Access as required.
3. To change the password, c
To change the password, click
The Password parameter opens. In the upper textbox, type the new password; in
parameter opens. In the upper textbox, type the new password; in
parameter opens. In the upper textbox, type the new password; in
the lower textbox, confirm the new password.
the lower textbox, confirm the new password.
You cannot change the password of an Administrator who is currently logged on
You cannot change the password of an
to the system.
4. Click OK.
The User page opens with the user information changed accordingly
User page opens with the user information changed accordingly.
User page opens with the user information changed accordingly
(see Figure 18), in the Access parameter, select
Information
of the following User parameters: Permission, Access
(see Figure 17), select a User and click the Edit button
Figure 20 – Edit User Page
Configuring the Network
Configuring
Configuring User Settings
Configuring
ser. This means that the User's name
select the Block
Access, and
.
button.
currently logged on
User Guide | 31