Face Detection - HIKVISION Network Camera User Manual

User Manual of Network Camera
details to configure FTP parameters.
2) Check the Enable Timing Snapshot checkbox.
 Upload event-triggered snapshots to FTP
Steps:
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check
interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion
Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in Section
6.6.4.
3) Check the Enable Event-triggered Snapshot checkbox.

6.6.8 Face Detection

Note: Face detection is only for certain modules, check the specification for whether
the module supports the function.
If you enable the face detection, once a face appears in the surveillance area, it will
be detected and certain actions may be triggered by the detection.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
checkbox in Motion Detection Settings or Alarm Input
Snapshot Settings
Figure 6-34
64
checkbox in FTP