Configuring Ddns Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
Note: The User Name and Password should be assigned by your ISP.
4. Click
Note: it will ask for a reboot for the settings to take effect.

6.3.4 Configuring DDNS Settings

Purpose:
If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings of
the camera.
Steps:
1. Enter the DDNS Settings interface:
Configuration > Advanced Configuration > Network > DDNS
2. Check the Enable DDNS checkbox to enable this feature.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
PPPoE Settings
Figure 6-8
to save and exit the interface.
DDNS Settings
Figure 6-9
39