Operating Ptz Control; Ptz Control Panel - HIKVISION Network Camera User Manual

User Manual of Network Camera
click to record the live video. The saving paths of the captured pictures and
clips can be set on the Configuration > Local Configuration page. To configure
remote scheduled recording, please refer to Section 6.2.
Note: The captured image will be saved as a JPEG file in your computer.

5.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the
PTZ parameters on RS-485 Settings page referring to Section 10.6 RS-485 Settings.

5.4.1 PTZ Control Panel

On the live view page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
Notes:
 There are 8 direction arrows ( ,
window when you click and drag the mouse in the relative positions.
 For the cameras which support lens movements only, the direction buttons are
invalid.
Button
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to show the PTZ control panel or click
PTZ Control Panel
Figure 5-2
,
Descriptions of PTZ Control Panel
Table 5-2
, , , , ,
Description
Zoom in/out
31
to
) in the live view