61
User Manual of Network Camera
Alarm Output Settings
Figure 6-31
6.6.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1.
Exception Settings
Figure 6-32
3. Click
to save the settings.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.