Section 3: Operations; Basic Controls - Grizzly T23103 Owner's Manual

SEcTION 3: OPERaTIONS

To reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
Damage to your eyes, hands and feet could
result from using this machine without prop-
er protective gear. always wear safety glass-
es, leather gloves, and steel toe footwear
when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONgLy REc-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Model t23103 (Mfg. 12/09 and later)
use figures 10–11 and the descriptions below
to become familiar with the basic controls of your
this entire
slip roll.
Thickness adjustment Knob: raises and low-
ers the bottom roller to adjust for thicknesses of
different workpieces.
crank: turns the rollers, feeding the workpiece
through the machine.
Radius adjustment Knob: raises and lowers
the rear roller to create smaller and larger radius
bends.
adjustment
Removable bushing: Slides out to allow removal
of the top roller to facilitate the unloading of cylin-
drical workpieces.

basic controls

thickness
Knob
figure 10. adjustment knobs.
removable Bushing
figure 11. removable bushing.
radius
adjustment
Knob
removable Bushing
-13-