Grizzly T28929 Instructions Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The T28929 2" Pipe/Tube Notcher cuts notches in
pipe and tubing to make joints that fit together per-
fectly. This notcher features a durable steel frame,
is capable of 0-45˚ angle cuts, and works with any
standard drill press or slow-speed hand drill.
Figure 1. T28929 2" Pipe/Tube Notcher.
Specifications
Maximum Tube Diameter ................................. 2"
Chuck Dimension ............................................
Workpiece Degree Range ..........................0˚-45˚
Req. Clearance Between Chuck and Table ... 14"
Spindle Threads .......................................
To reduce your risk of
serious injury, read this
entire
using machine.
Assembly
The notcher comes from the factory with the
spindle inverted. Before use, the spindle must be
removed and turned around.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ ",
1
2
manual BEFORE
COPYRIGHT © MAY, 2020 BY GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 11/18) #CS21020 PRINTED IN CHINA
MODEL T28929
2" PIPE/TUBE NOTCHER
To install spindle for use:
1. Pull pin shown in Figure 2 to release spindle.
2. Remove
(see Figure 2).
Figure 2. Spindle release components.
3.
Re-insert spindle, threaded end first (see
Figure 3).
⁄ "
1
4. Align hole in side of spindle with hole in
2
bracket and insert pin (see Figure 3).
⁄ "
5
8
Figure 3. Inserting spindle for operations.
INSTRUCTIONS
⁄ " adapter and washer from spindle
5
8
Adapter Washer
Pin
Pin Holes
⁄ " Adapter
5
8
V1.05.20