Pc Port Settings - Draytek VigorPhone 350 User Manual

Keep Alive Mode:
Remote IP:
Activation:
Identifier/Priority:
Click OK to save your settings or Reset to cancel.
3 . 9 . 3 P C P o r t S e
3 . 9 . 3 P C P o r t S e
To configure LAN settings and DHCP server setting from the web browser, click Network>>PC Port
Settings. The following screen will be displayed.
To configure PC Port settings, do the following:
Select a suitable mode, options are:
1.
NAT:
Bridge:
If NAT is selected, you can activate DHCP Server settings. The required information are as follows:
2.
DHCP Server:
Start IP:
Select option, Ping DNS1 or Ping Remote IP.
Enter remote IP address.
Select On for activating VLAN setting.
The Identifier and Priority fields are enabled for user input. Enter the
necessary information.
t t i n g s
t t i n g s
This will enable PC port Setting required fields for user input. Enter
IP address, Netmask, and Mac address.
Configure PC port mode using Bridge settings.
Select whether to enable/disable DHCP server.
Input Start IP address.
49