Draytek vigorphone 300 User Manual
  1. Manuals
  2. Brands
  3. Draytek Manuals
  4. IP Phone
  5. vigorphone 300
  6. User manual
Draytek vigorphone 300 User Manual

Draytek vigorphone 300 User Manual

Vigorphone series
Hide thumbs Also See for vigorphone 300:
Table of Contents

Advertisement

Quick Links

i

Advertisement

Table of Contents
loading

Related Manuals for Draytek vigorphone 300

Summary of Contents for Draytek vigorphone 300

  • Page 2 VigorPhone 300 User’s Guide Version: 1.0 Date: 05/03/2012...

  • Page 3: Copyright Information

    Web registration is preferred. You can register your device via Owner http://www.draytek.com. Firmware & Tools Due to the continuous evolution of DrayTek technology, all devices will be regularly Updates upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.

  • Page 4: Regulatory Information

    (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired operation. Please visit http://www.draytek.com/user/AboutRegulatory.php. CE Notice (European Union) The symbol indicates compliance of this equipment to the EMC Directive and the Low Voltage Directive of the European Union.

  • Page 5: Table Of Contents

    Table of Contents Chapter 1 Overview ......................7 1.1 Package Contents ........................7 1.2 Product Description ........................8 1.2.1 Front View............................8 1.2.2 Back View ............................9 1.3 Setting Up the Phone ......................10 Chapter 2 Display Screen Configuration ...............11 2.1 Memory Key .........................11 2.1.1 Dialing with Memory Key ......................11 2.1.2 Edit the Memory Key .........................12 2.1.3 Exit the Memory Key........................13 2.2 Do Not Disturb ........................13...
  • Page 6 3.6.2 Firewall ............................72 3.6.3 NAT............................75 3.6.4 VPN ............................77 3.7 Logout...........................78 Chapter 4 Operation ......................79 4.1 Set up VigorPhone 300 with VigorIPPBX Series..............79 4.2 Answer Call ..........................84 4.3 Place Calls..........................85 4.4 End Calls ..........................86 4.5 Call Transfer .........................87 4.6 Call Hold ..........................87 4.7 3-way Conference Call ......................87...

  • Page 7: Chapter 1 Overview

    Chapter 5 Operation VigorPhone enables you to make phone calls through the IP network instead of calling through a tradition local PSTN line. It is workable with VigorIPPBX series for auto provision capability. To manage various calling purposes, VigorPhone supports multi-sip registration with different accounts (up to 10) and support G.722 codec for promoting voice quality.

  • Page 8: Product Description

    This VoIP Phone features based on SIP (RFC 3261). Please familiarize yourself with the functions of the VoIP phone. Item Name Description Memory key (1-6) Users could store their commonly used number in these keys, and call for them as speed dial. Display Screen Displays calls and status information.

  • Page 9: Back View

    Item Name Description Headset Jack Connects to an external headset.(RJ-9) Handset Jack Connects to the phone.(RJ-9) LAN/PC Port Connects to PC. 10/100Mbps RJ-45 port for PC (downlink) connection. Connects to LAN cable. WAN/ PoE Port 10/100Mbps RJ-45 port for LAN (uplink) connection. If you are using Power over Ethernet (PoE), the power to the phone is supplied when you connect the Ethernet cable.

  • Page 10: Setting Up The Phone

    The following illustration shows how to connect the VoIP phone to power, LAN, WAN, and the handset or a headset.

  • Page 11: Chapter 2 Display Screen Configuration

    The menu directory enables you to setup the product configuration from Phone Settings, VoIP settings, and Network settings. Follow these steps to access the menu and the menu items. Below shows the LCD of VigorPhone (successful hardware connection): Memory keys (also called function keys in the web configurator of Phone>>Function Key) can be set with specific type, value, line and other function parameters (speed dial, push to talk, DND and so on).

  • Page 12: Edit The Memory Key

    1. Click one of the memory keys you want. In default, all the telephone numbers will be displayed with Null if you haven’t created any memory key. Button Explanation Dial Have a phone call to the selected one. Edit Modify the information for the selected one. Quit Exit and return to previous page.

  • Page 13: Exit The Memory Key

    4. Click the soft key under Save to store the settings. Now, memory key 1 has been changed with new name and number. Simply press the soft key under Quit to exit the memory key and return to the home page. Simply press the soft key under DND button on the home page.
  • Page 14 2. Use the Navigation keys to move up, down, left or right to choose the one you want. In this case, we choose #1 as an example. Button Explanation >> Click it to access into next entry. Edit Modify the information for the selected one. Quit Exit and return to previous page.

  • Page 15: Phone Book

    4. Click the soft key under Save to store the settings. Now, speed dial # 1 has been changed with new name and number. 1. Press the soft key under PBook to access into the configuration page. 2. For there is no phone book created, the LCD displays the message of “List Is Empty”. Button Explanation It allows you to add a new name and telephone number to the phone...
  • Page 16 3. Click the soft key under Add to display the following screen. In the field of Name, please type John; and in the field of Tel, please type 660. Button Explanation Delete It allows you to remove the information you type. Save Save the information you type.

  • Page 17: Incoming/Outgoing Call

    5. Click the soft key under Quit. You will find a new name with phone number has been created. Button Explanation Option It allows you to edit information, save the phone book, delete the phone book, send a message to other people and so on. Dial Have a phone call to the selected one.
  • Page 18 2. Press the soft key under Enter to access into the next page of incoming call. See the figure below. Button Explanation Option It allows you to check detailed information for the missed call, save the missed call, delete the missed call, send a message to the missed call, and so on.

  • Page 19: Missed Call And Indicator Light

    If the indicator light always blinks, it means there is a missed call that you have to process. Please do the following: 1. Press the navigation key to open the missed call record. All the missed calls will be shown on the display screen.

  • Page 21: Chapter 3 Web Configuration

    This chapter contains important information to help you configure the settings for your VoIP phone from the web browser. If your VoIP phone is using factory default, it sets LAN/PoE port as DHCP client and enable Bridge mode for PC port. To access the web configuration menu, do the following: Connect one end of the Ethernet cable provided to the LAN/PoE port of your phone to your router with DHCP service enable.

  • Page 22: Basic

    After you login, move the cursor over the menu items on the left navigation bar to access the dropdown menus. Field name Explanation Network Shows the configuration information on WAN and LAN port, including the connect mode of WAN port (Static, DHCP, PPPoE), MAC address, the IP address of WAN port and LAN port, ON or OFF of DHCP mode of LAN port.

  • Page 23: Wizard

    Please select the proper network mode according to the network condition. VigorPhone provides three different network settings. Field name Explanation Static IP Mode If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting. If you don’t know about parameters of Static Mode setting, please ask your ISP for them.
  • Page 24 Gateway Input the Gateway address distributed to you. DNS Domain Set DNS domain postfix. When the domain which you input can not be parsed, phone will automatically add this domain to the end of the domain which you input before and parse it again. Primary DNS Input your primary DNS server address.
  • Page 25 3. After finished the above settings, click Next to open the following page. 4. Click Finish to complete the configuration. DHCP Mode DHCP Mode 1. Choose and click Next. You can get the following web page.
  • Page 26 2. After finished the above settings, click Next to open the following page. Field name Explanation Display Name Set the display name. Server Address Input your SIP server address. Server Port Set your SIP server port. User Name Input your SIP register account name. Password Input your SIP register password.
  • Page 27 PPPoE Mode PPPoE Mode 1. Choose and click Next. You can get the following web page. 2. After finished the above settings, click Next to open the following page. Field name Explanation PPPoE Server It will be provided by ISP. Username Input your ADSL account.
  • Page 28 3. After finished the above settings, click Next to open the following page. Field name Explanation Display Name Set the display name. Server Address Input your SIP server address. Server Port Set your SIP server port. User Name Input your SIP register account name. Password Input your SIP register password.

  • Page 29: Call Log

    5. Click Finish to complete the configuration. IP Phone will save the setting automatically and reboot. After reboot, you can dial by the SIP account. You can query all the outgoing through this page. Field name Explanation Start Time Display the start time of the outgoing record. Last Time Display the conversation time of the outgoing record.

  • Page 30: Network

    Line Info In the standby screen showing the registration number of lines, when the time is displayed as NULL is not registered.

  • Page 31: Wan

    Please select the proper network mode according to the network condition. Vigor router provides three different network settings (Static, DHCP and PPPoE). WAN Status Field name Explanation Active IP The current IP address of the phone. Current Netmask The current Netmask address. MAC Address The current MAC address of the phone.
  • Page 32 WAN Setting - Static If your ISP server provides you the static IP address, please select Static and finish related setting. If you don’t know about parameters of Static Mode setting, please ask your ISP for them. Field name Explanation Obtain DNS server Select it to use DHCP mode to get DNS address, if you don’t select it, automatically...
  • Page 33 WAN Setting - DHCP If you uses DCHP mode, you will get the information from the DHCP server automatically. You don’t need to input this information artificially. Field name Explanation Apply Save the settings. WAN Setting - PPPoE If you uses PPPoE mode, you need to make the following settings. Field name Explanation PPPoE Server...

  • Page 34: Lan

    Field name Explanation LAN IP Specify LAN static IP. Netmask Specify LAN Netmask. DHCP Service Select the DHCP server of LAN port or not. After you modify the LAN IP address, phone will amend and adjust the DHCP Lease Table and save the result amended automatically according to the IP address and Netmask.

  • Page 35: Qos

    The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN functionality can use different VLAN IDs by setting signal/voice VLAN and data VLAN. The VLAN application of this phone is very flexible. In chart 1, there is a switch without setting VLAN. Any broadcast frame will be transmitted to the other ports except the send port.
  • Page 36 Field name Explanation VLAN Enable Before select it to enable VLAN, you need enable Bridge mode in LAN configuration. VLAN ID Check Enable VLAN ID check by selecting it. After enable VLAN ID check, Enable if VLAN ID of a data package is not the same with the phone or a data package do not have VLAN ID, the data package will be discarded.

  • Page 37: Service Port

    NOTICE： Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will use the Voice VLAN ID as the tag. Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disables the DiffServ, then system will not distinguish the voice and data, all packets will use the Voice VLAN ID as the tag.

  • Page 38: Dhcp Server

    accessing address is telnet 192.168.1.70 8023 RTP Initial Port Set the RTP Initial Port. It is dynamic allocation. RTP Port Quantity Set the maximum quantity of RTP Port, the default is 200. Notice: You need save the configuration and reboot the phone after set this page. If you modify the port of Telnet and HTTP, you would better set the value more than 1024 because the port value less than 1024 is system port reserved.
  • Page 39 DHCP Lease Table Shows the DHCP Lease Table, the unit of Lease time is Minute. DHCP Lease Table Allow to set corresponding settings for DHCP lease settings Setting Lease Table Name Specify the name of the lease table Start IP Set the start IP address of the lease table End IP Set the end IP address of the lease table, the network device connected...

  • Page 40: Sntp

    Setting time zone and SNTP (Simple Network Time Protocol) server according to your location, you can also manually adjust date and time in this web page. Field name Explanation Server Set SNTP Server IP address. Time Zone Select the Time zone according to your location. Time Out Set the time out, the default is 60 seconds.
  • Page 41 12 Hours Systems Switch the time mechanism between 12 hours and 24 hours. Default is 24 hours mode. SNTP Select the SNTP, and click Apply to make the SNTP Times effective. Enable Daylight Enable daylight saving time. Time shift (minutes) Setup the variety length.

  • Page 42: Voip

    Set your SIP server in the following interface. Field name Explanation SIP Line Select Choose line to set info about SIP, there are 3 lines to choose. You can...
  • Page 43 switch by using the Load button. Before configuring the basic settings, you have to load one SIP line first. Register Status Shows if the phone has been registered the SIP server or not; or so, show Unapplied; Server Name Set the server name. Server Address Input your SIP server address.
  • Page 44 Field name Explanation Register Expire Set expire time of SIP server register, default is 60 seconds. If the Time register time of the server requested is longer or shorter than the expire time set, the phone will change automatically the time into the time recommended by the server, and register again.
  • Page 45 Hot line Number Set hot line number of each line. Conference Number Configure conference number in server conference. Transfer Expire For the phone supports the transfer of certain special features server, set Time interval time between sending “bye” and hanging up after the phone transfers a call.
  • Page 46 appointed phone. No answer: If there is no answer, incoming calls will be forwarded to the appointed phone. Always: Incoming calls will be forwarded to the appoint phone directly. The phone will Prompt the incoming while doing forward. Forward Phone Appoint your forward phone number.
  • Page 47 RFC Privacy Set Anonymous call out safely; Support RFC3323and RFC3325. Edition Subscribe Expire Overtime of resending subscribe packet. Suggest using the default Time configuration. Enable Conference Set to use sever conference. number MWI Number Input the number of the server's voice-mail box. Click to Talk Set click to Talk (need practical software support).

  • Page 48: Iax2

    Field name Explanation Register Status Shows if the phone has been registered the IAX2 server or not. IAX2 Server Addr Input your IAX2 server address. IAX2 Server Port Set your IAX2 server port, the default is 4569. Account Name Input your IAX2 register account name. Account Password Input your IAX2 register password.

  • Page 49: Stun

    Echo Test Text Specify echo test text’s name. Refresh Time Set expire time of IAX2 server register, you can set it between 60 and 3600 seconds. Enable Register Start to register the IAX2 server or not by selecting it or not. Enable G.729 Enable or disable code G.729 by selecting it or not By STUN server, the phone in private network could know the type of NAT and the NAT mapping IP...

  • Page 50: Dial Peer

    Field name Explanation STUN NAT Shows STUN NAT Transverse estimation, true means STUN can Transverse penetrate NAT, while False means not. STUN Server Addr Set your SIP STUN Server IP address STUN Server Port Set your SIP STUN Server Port STUN Effect Time Set STUN Effective Time.
  • Page 51 To save the memory and avoid abundant input of user, add the follow functions: matches any single digit that is dialed. If a user makes the above configuration, after he/she dials 11 digit numbers started with 13, the phone will send out 0 plus the dialed numbers automatically. [ ] Specifies a range that will match digit.
  • Page 52 dial the prefix and a phone number to realize calling to what your prefix number is mapped. The prefix number supports at most 30 digits. Destination Set Destination address. This is optional configuration item. If you want to set peer to peer call, please input destination IP address or domain name.
  • Page 53 This setting will realize speed dial When you dial “2”, the function, after you dialing the SIP1 server will receive numeric key “2”, the number after all 33334444 will be sent out. The phone will automatically send When you dial “8309“, out alias number adding your dialed the SIP1 server will number, if your dialed number starts...
  • Page 54 8T mapping: If you have registered a Private SIP2 server and set dial-peer according to the above table， all calls will be sent via SIP2 server when you press the numeric key “8” in front of dialing destination phone numbers. 2T mapping: The rule of 2T means the user needs to dial the number with prefix 2 if he/she wants to dial via IAX2 server.

  • Page 55: Phone

    In this page, you can configure voice codec, input/output volume and so on.
  • Page 56 Field name Explanation First Codec The fist preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726,AMR Second Codec The second preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726 Third Codec The third preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726,AMR Forth Codec The forth preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726,AMR Fifth Codec The fifth preferential DSP codec: G.711A/u, G.722, G.723,...
  • Page 57 Hands-free Volume Specify Hands-free Volume grade. Ring Volume Specify Ring Volume grade. G729 Payload Set G729 Payload Length. Length Signal Standard Select Signal Standard. G722 Timestamps 160/20ms or 320/20ms is available. G723 Bit Rate 5.3kb/s or 6.3kb/s is available Select it or not to enable or disable VAD. If enable VAD, G729 Payload length could not be set over 20ms.

  • Page 58: Call Service

    In this web page, you can configure Hotline, Call Transfer, Call Waiting, 3 Ways Call, Black List, white list Limit List and so on. Field name Explanation Specify Hotline number. If you set the number, you can not dial any Hotline other numbers.
  • Page 59 Enable Call Transfer Enable Call Transfer by selecting it. Enable Call Waiting Enable Call Waiting by selecting it. Enable Three Way Enable Three Way Call Call If select it, the phone will accept the call even if the called number is Accept Any Call not belong to the phone.

  • Page 60: Digital Map

    he/she may add the number(s) to the list as the white list rule. the configuration rule is -number, for example, -123456, or -1234xx. Means any incoming number is forbidden except for 4119 Note: End with “.” when set up the white list Set Add/Delete Limit List.
  • Page 61 Field name Explanation End with "#" Set Enable/Disable the phone ended with “#” dial. Fixed Length Specify the Fixed Length of phone ending with. Time out Set the timeout of the last dial digit. The call will be sent after timeout. Digital Rule table Set and display the user defined digital rules.

  • Page 62: Phone Book

    You can input the name, phone number and select ring type for each name here. The maximum capability of the phonebook is 500 items Field name Explanation Phonebook Table Name - Shows the name corresponding to the phone number. Number - Shows the phone number. Add Phone Book Name –...

  • Page 63: Function Key

    This page allows you to configure function keys (also called memory keys in IP Phone) with specific type, value, line and other function parameters (speed dial, push to talk, DND and etc). Field name Explanation Interface Contrast - Set contrast of screen. Configuration Luminance - Set luminance of screen.
  • Page 64 Memory Key: settings can be stored in key storage for each number, the standby or off-hook. Selecting the function keys on the keyboard can call this number. DTMF：In the call, send DTMF. Value –Set the type parameter values. Line – Choose which lines to use this feature. Subtype –...

  • Page 65: Maintenance

    Field name Explanation Current Config Show the current config file’s version. Version...

  • Page 66: Syslog

    Server Address Set FTP/TFTP/HTTP server IP address for auto update. The address can be IP address or Domain name with subdirectory. Username Set FTP server Username. System will use anonymous if username keep blank. Password Set FTP server Password. Config File Name Set configuration file’s name which need to update.
  • Page 67 Level 7---debug: the lowest debug info. Professional debugging info from R&D person. At present, the lowest level of debug information send to Syslog is info, debug level only can be displayed on telnet. Field name Explanation Server IP Set Syslog server IP address. Server Port Set Syslog server port.

  • Page 68: Config

    Field name Explanation Save Configuration You can save all changes of configurations. Click the Save button, all changes of configuration will be saved, and be effective immediately. . Backup Config Right clicks on “Right click here…” and select “Save Target As….” then you will save the configuration file in .txt format Clear Configuration A user can restore factory default configuration and reboot the phone.

  • Page 69: Update

    You can update your configuration with your configuration file in this web page. Field name Explanation Web Update Click the browse button, find out the configuration file saved before or provided by manufacturer, download it to the phone directly, press “Update”...

  • Page 70: Account

    from FTP/TFTP server. Protocol Select FTP/TFTP server. You can add or delete user account, and change the authority of each user account in this web page. Field name Explanation Set Keyboard Keyboard Password - Set the password for entering the setting menu of Password the phone by the phone‘s key board.

  • Page 71: Reboot

    Add User User Name - Set account user name. User Level - Set user level, Root user has the right to modify configuration, General can only read. Password - Set the password.. Confirm - Confirm the password. Submit – Save the settings. Account Option Select the account and click the Modify to modify the selected account, and click the Delete to delete the selected account.

  • Page 72: Mmi Filter

    User could make some device own IP, which is pre-specified, access to the MMI of the phone to config and manage the phone. Field name Explanation MMI Filter Table MMI Filter IP Table list. MMI Filter Table Add or delete the IP address segments that access to the phone. Set initial IP address in the Start IP column, Set end IP address in the End IP column, and click Add to add this IP segment.
  • Page 73 We will give you an instance for your reference. Field name Explanation In access enable Select it to Enable in_ access rule out access enable Select it to Enable out_ access rule Input/Output Specify current adding rule by selecting input rule or output rule. Deny/Permit Specify current adding rule by selecting Deny rule or Permit rule.
  • Page 74 Port Range Set the filter Port range. Src Addr Set source address. It can be single IP address, network address, complete address 0.0.0.0, or network address similar to *.*.*.0 Des Addr Set the destination address. It can be IP address, network address, complete address 0.0.0.0, or network address similar to *.*.*.* Src Mask Set the source address’...

  • Page 75: Nat

    NAT is abbreviated from Net Address Translation; it’s a protocol responsible for IP address translation. In other word, it is responsible for transforming IP and port of private network to public, also is the IP address mapping which we usually say. In order to make some intranet equipments support better service for extranet, and make internal network security more effectively, these equipments open to extranet need be separated from the other equipments not open to extranet by the corresponding isolation method according to different demands.
  • Page 76 Field name Explanation Protocol Set IPSec ALG - It is an encryption technology. Select it to enable IPSec ALG, the default is enabled. FTP ALG - FTP is a service of connection layer which can transform intranet IP into extranet IP when intranet IP is sending out packet. Select it to enable FTP ALG, the default is enabled.
  • Page 77 Outside Port - Set the WAN port of the NAT mapping. Inside IP - Set the IP address of device which is connected to LAN interface to do NAT mapping. Inside Port - Set the LAN port of the NAT mapping. Notice: After finish setting, click the Add button to add new mapping table;...

  • Page 78: Vpn

    Field name Explanation VPN IP Shows the current VPN IP address VPN Mode Enable VPN - Select it or not to enable or disable VPN. L2TP VPN Server Addr - Set VPN L2TP Server IP address. VPN User Name - Set User Name access to VPN L2TP Server. VPN Password - Set Password access to VPN L2TP Server.

  • Page 79: Chapter 4 Operation

    DrayTek VigorIPPBX series supports the function of auto-provisioning. VigorPhone 300 is also capable of auto-provisioning, it can get a configuration text file from the VigorIPPBX series. The configuration file contains SIP settings that the SIP devices can register with VigorIPPBX series.
  • Page 80 Click IPPBX Wizard to get the first screen as shown below: Type the extension group name, group number, start number, and number of extension fields. Click OK to save them. The new added group will be displayed on the screen. Then click Next to access into next web page.
  • Page 81 Type the profile name, domain/realm, proxy, account number/name, password and trunk number fields, then click OK to save them. The new added profile will be displayed on the screen. Click Next to access into office hour setup page. Please specify office hours including starting point and ending point on duty day(s).Then, click Finish to save the settings and exit the wizard.
  • Page 82 After finishing the Wizard, please go to IPPBX>Extension to configure the Extension Number and the Password settings. Click the index number 1. Type in Extension Number and Password. 10. Then connect VigorPhone to the network. Each user of VigorPhone can get the extension number/password respectively.
  • Page 83 11. Access into the web configurator of VigorPhone 300 (e.g., 192.168.1.11). 12. Open VoIP and press the SIP tab to display the following page.

  • Page 84: Answer Call

    15. Later, if Register Status display “Registered”, that means the extension number for VigorPhone has been registered successfully. VigorPhone 300 will ring to indicate you when there is call incoming, below is the ways to answer call: Answer with hook off Take handset, you can talk directly.

  • Page 85: Place Calls

    Using handset instead of hands-free during a talk Hook off the handset when you use hands-free and want to change to use handset. Just hook on to finish talk. Using headset instead of hands-free during a talk In the hands-free calls, press .

  • Page 86: End Calls

    or press the first character of the name for searching the person which you want to contact. Press to forward and press to backward. Press Soft2 (Dial) to dial the current number shown on the screen. Speed dial Speed dial means user can make calls directly without hook off or using hands-free. User can dial number in stand-by mode, but first, user need to add and edit SDial no.

  • Page 87: Call Transfer

    1. Blind Transfer During talk, press or Soft2 (Transf), and then dial the number that you want to transfer to, and finished by "#". Phone will transfer the current call to the third party. After finishing transfer, the call you talk to will be hanged up. 2.

  • Page 88: Special Keys

    Incoming call Press and screen displays “Incoming Call”, by pressing & to browse the records; or press Soft1 (Option) to check the details of this record, then press Soft2 (EDial) again to change the current number. Pressing Soft2 (Dial) will call this number directly if user don’t modify the number.

  • Page 89: Call Pickup

    Message waiting indication After you set it, you can pick up or hands-free, then press to listen to record in server when you have new voice message. Phone book search function In the Chinese version, users can be retrieved by the corresponding initials Chinese name, which simplifies the steps in the phone book to find contacts.

  • Page 90: Redial/Un-Redial

    If B is in busy line when A calls B, A will get notice: busy, please hang up. If A want to connect B as soon as B is in idle, he can use redial function at the moment and he can dials an appointed prefix number plus B’s number to realize redial function.

  • Page 91: Appendix A Specifications

    A.1.1 Hardware Item Description Adapter Input: 100-240V (Input/Output) Output: 5V 1A port 10/100Base- T RJ-45 for LAN 10/100Base- T RJ-45 for PC Power Consumption Idle: 2.5W/Active: 2.8W LCD Size 128x96 53.5 x 70mm Operation Temperature 0～40℃ Relative Humidity 10～65% Broadcom SDRAM 16MB Flash...

  • Page 92: Digit-Character Map Table

    Support SIP Privacy Support SMS Support WMI Support Speed dial Support XML A.1.3 Network features WAN/LAN: support bridge and router model Support PPPoE for xDSL Support basic NAT and NAPT Support VLAN (optional: voice vlan/ data vlan) NAT Penetrate, Stun Penetrate Support DMZ Support VPN (L2TP) function Wan Port supports main DNS and secondary DNS server, can select dynamically to get DNS in...
  • Page 93 4 G H I g h i 5 J K L j k l 6 M N O m n o...

Table of Contents