How to upgrade firmware for VigorPhone
1.
For the firmware version before 12202.26.01.04, please click the following link to download
the firmware 12202.26.01.04 first and follow the steps listed below to carry out the firmware
upgrade;
http://www.draytek.com/user/SupportDownloadsDetail.php?action=Load&MID=129&ID=395
For the firmware version of 12202.26.01.04 or later, please follow the steps listed below to
carry out the firmware upgrade for VigorPhone.
2.
Next, access into the web user interface of VigorPhone and open System Settings >>
Firmware Upgrade. Choose the file of 12202.26.1.4 and click OK.
3.
Download the Router Tool from DrayTek website,
http://www.draytek.com/user/SupportDLUtility.php
4.
Connect your computer with VigorPhone by LAN port/PoE port. Configure your computer
with Static IP by entering the following information.
IP address: 192.168.1.10
Subnet mask:255.255.255.0
Gateway:192.168.1.1
5.
Make sure the network connection between your computer and VigorPhone is stable, then cut
off the power of VigorPhone (unplug the power cord).
6.
Press and hold ENTER and MENU keys and plug the power cord of VigorPhone.
7.
When VigorPhone restarts, a message of AUTO UPGRADE Wait for Image will be
displayed on the screen of VigorPhone. If the message of AUTO UPGRADE TFTP Fail
appears, it indicates the connection between the computer and VigorPhone is failed. Please
redo the work of Step 5.
8.
Open Start>>Programs>>Router Tools>>Firmware Upgrade Utility. Type 192.168.1.2 in
the field of Router IP. After selecting the correct firmware, please type the login password of
VigorPhone and click Send.
and install the tool onto your computer.
1