Table of Contents
Advertisement
NOTICE：
1.
Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will use
the Voice VLAN ID as the tag.
2.
Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disables the
DiffServ, then system will not distinguish the voice and data, all packets will use the Voice
VLAN ID as the tag.
3.
Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enables the
DiffServ, then system will distinguish the voice and data and add the VLAN ID each other.
4.
Startup VLAN, if set Voice/Data VLAN differentiated as data untagged, then the packet of the
signal/voice will use the Voice VLAN ID as the tag, but the data packets will not take the
VLAN tag.
5.
If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all packets
will not take the VLAN tag; If enable the DiffServ, all packets will only take the DiffServ
value.
6.
One must to notice, enable the VLAN ID Check Enable that is default, If enable it, the phone
will match the VLAN ID strictly. When others' VLAN ID does not match with us, the packets
will discard. Contrarily, the phone will accept the packets with the distinct VLAN ID.
7.
You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP in
the VLAN and also can not dial with point to point.
3
.
2
.
4
S
e
r
v
i
c
e
P
o
3
.
2
.
4
S
e
r
v
i
c
e
P
o
You can set the port of telnet/HTTP/RTP by this page.
Field name
HTTP Port
Telnet Port
r
t
r
t
Explanation
set web browse port, the default is 80 port，if you want to enhance
system safety，you'd better change it into non-80 standard port；
Example: The IP address is 192.168.1.70. and the port value is 8090,
the accessing address is http://192.168.1.70:8090
Set Telnet Port, the default is 23. You can change the value into others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the
37
Hide quick links:
Advertisement
Table of Contents
