Remove Programs - Honeywell Dolphin 7600 User Manual
Mobile computer with windows mobile 6
Hide thumbs
Also See for Dolphin 7600:
- User manual (142 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
Remove Programs
Remove Programs enables you to remove programs installed on the terminal. Use this setting to
troubleshoot when you receive messages that the terminal is out of memory. The programs removed are
removed from RAM memory.
Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall)
will re-install after the next hard reset. For information about the hard reset process, see
Hard Reset (Cold
Boot)
on page
3-25.
1. Tap Remove Programs. In the list, select the program you want to remove.
2. Tap Remove. The following message appears:
3. Tap Yes. Wait while the program is removed.
4. Verify that the program no longer appears in the list.
6 - 13
Advertisement
Table of Contents
