Table of Contents
Advertisement
CLASS 320 METER
10.3.2 Device I.D.
To change Device I.D., complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
Date & Time
Device ID
Reset KW/KWH Read
Exit
3. Use the UP and DOWN buttons to select the Device ID line.
Press the SELECT button. The Device I.D. screen will appear.
EZ7 ID:
MODBUS ID:
4. Locate the number to be changed in the menu, press and hold Button 4 (Down
Button) for 3 seconds, release the button, the last digit for this number blinks,;
5. To change the number of the digit, use Button 3 (Up Button) to cycle
through 0 to 9.
6. Press Button 4 to move to the next digit, and repeat Step 5.
7. To exit the mode of changing number by digit, press Select Button;
To save the new number, press Main Menu Button and select "Y" to save.
Save Change? Y
62-0397-02
1A
2
40
Advertisement
Table of Contents
