The Port Forwarding Edit Screen - ZyXEL Communications P-2612HNU-F1 User Manual

Chapter 11 Network Address Translation (NAT)
Table 44 Network Setting > NAT > Port Forwarding (continued)
LABEL
Translation
Start Port
Translation End
Port
Server IP
Address
Protocol
Modify
Apply
Cancel

11.2.2 The Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Click Add new rule in
the Port Forwarding screen or the Edit icon next to an existing rule to open the
following screen.
Figure 77 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 45 Port Forwarding: Add/Edit
LABEL
Service Name
WAN Interface
202
DESCRIPTION
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
This shows the IP protocol supported by this virtual server, whether it is
TCP, UDP, or TCP/UDP.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note
that subsequent address mapping rules move up by one when you take
this action.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-
2 and so on).
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
P-2612HNU(L)-FxF User's Guide