ZyXEL Communications P-2612HNU-F1 User Manual page 105

type you select. If you select ADSL as the interface type, the following screen
appears.
Figure 18 Broadband Add/Edit: Bridge (ADSL)
The following table describes the fields in this screen.
Table 9 Broadband Add/Edit: Bridge (ADSL)
Label
General
Name
Type
Mode
P-2612HNU(L)-FxF User's Guide
DESCRIPTION
Enter a service name of the connection.
Select ADSL as the interface for which you want to configure here.
The ZyXEL Device uses the ADSL technology for data transmission
over the DSL port.
Select Bridge when your ISP provides you more than one IP address
and you want the connected computers to get individual IP address
from ISP's DHCP server directly. If you select Bridge, you cannot use
routing functions, such as QoS, Firewall, DHCP server and NAT on
traffic from the selected LAN port(s).
Chapter 5 Broadband
105