ZyXEL Communications P-2612HNU-F1 User Manual page 303

Do not screw the screws all the way into the wall. Leave a small gap of about 0.5
3
cm between the heads of the screws and the wall.
Make sure the screws are snugly fastened to the wall. They need to hold the
4
weight of the ZyXEL Device with the connection cables.
Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang
5
the ZyXEL Device on the screws.
Figure 130 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall
mounting. All measurements are in millimeters (mm).
Figure 131 Masonry Plug and M4 Tap Screw
P-2612HNU(L)-FxF User's Guide
Chapter 28 Product Specifications
303