C
H A P T E R
3.1 Overview
This chapter contains the following tutorials:
•
Setting Up Your DSL Connection
•
How to Set up a Wireless Network
•
Setting Up NAT Port Forwarding
•
How to Make a VoIP Call
•
Using the File Sharing Feature
•
Using the Print Server Feature
•
Configuring the MAC Address Filter
•
Configuring Static Route for Routing to Another Network
•
Configuring QoS Queue and Class Setup
•
Access the ZyXEL Device Using DDNS
3.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the web
configurator.
If you connect to the Internet through a DSL connection, use the information from
your Internet Service Provider (ISP) to configure the ZyXEL Device. Do the
following steps:
Connect the ZyXEL Device properly. Refer to the Quick Start Guide for details on
1
the ZyXEL Device's hardware connection.
Check the back panel of your device where the Ethernet ports are located and
2
make sure the DSL/WAN switch is pointing up to DSL.
P-2612HNU-Fx User's Guide
3
Tutorials
37