Configuring TCP/IP
Chapter 6: Configuring TCP/IP
Configuring TCP/IP in Windows 2000
Figure 6-1: Windows Control Panel
68P09306A78-A
FEB 2010
This section contains two examples of configuring TCP/IP in a Windows environment.
Most computers already have the TCP/IP configuration enabled. Use the following
procedures to verify that the configuration is set up. Configure all client computers
on your network for TCP/IP (the protocol that controls communication among
computers).
Two examples are provided in this document:
•
Configuring TCP/IP in Windows 2000
•
Configuring TCP/IP in Windows XP
Follow the instructions in your computer user manual for other
Operating Systems.
1.
On the Windows, click Start.
2.
Select Settings and then Control Panel from the pop-up menus to display the
Control Panel window:
6
6-1