Section 5: Configuring Tcp/Ip; Configuring Tcp/Ip In Windows 2000 - Motorola CPEI 25150 User Manual

Section 5: Configuring TCP/IP

Configuring TCP/IP in Windows 2000 (page 22)
Configuring TCP/IP in Windows XP (page 26)
This section contains two examples of configuring TCP/IP in a Windows environment. Most computers
already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is
set up.
All client computers on your network must be configured for TCP/IP (the protocol that controls communication
among computers).
Note:
Follow the instructions in your computer user manual for other Operating Systems.

Configuring TCP/IP in Windows 2000

1.
On the Windows desktop, click
2.
Select and then
Settings
Start .
from the pop-up menus to display the Control Panel window:
Control Panel
Figure 13: Windows Control Panel
Section 5: Configuring TCP/IP 22