Change Channel Control - Cisco AT8560 User Manual

Change Channel Control

Your remote is originally programmed in one of the following ways:
• The remote controls channels for a single device, such as the set-top,
whether the remote is in CBL, VCR, DVD, or TV mode. The AUX mode always
retains separate channel control.
• The remote controls channels for diff erent devices, depending on the mode
key you press.
Try your remote to see how the channel control currently works. The channel
keys include
channel control, complete the procedure that fi ts your needs.
Tip: Consider programming the remote to control channels for just the set-top
to ensure you do not accidentally tune off the proper channel for the TV (usually
channel 3 or 4).
Controlling Channels For One Device (Program Code 9 9 7)
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 7. The CBL key blinks twice.
3. Press the mode key associated with the device you want the channel keys to
control. For example, if you want to assign channel control to your TV only,
press TV. All mode keys blink three times.
Notes:
• The channel keys now always control the device associated with the mode
you selected in this step, whether in TV, CBL, DVD, or VCR mode.
• In AUX mode, the remote always controls channels for the device assigned
to the AUX key.
Controlling Channels For Diff erent Devices (Program Code 9 9 7)
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 7. The CBL key blinks twice.
3. Press SELECT. All mode keys blink three times.
Result: After you press SELECT, the channel keys now control the device
associated with the mode key you select. For example, in TV mode, the
channel keys control the TV, but in CBL mode, the channel keys control the
set-top.
14
, , Digits 0-9, LAST, and FAV. If you want to change the