Cisco AT8560 User Manual page 14

Want An Example?
If you want to control power for the TV and the set-top at the same time, you
would do the following:
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 8. The CBL key blinks twice.
3. Press TV. The CBL key blinks twice.
4. Press CBL. The CBL key blinks twice.
5. Press SELECT. All mode keys blink three times.
In this example, the remote will function in the following ways:
• When you are in TV mode or CBL mode, the POWER key controls both the
set-top and the TV.
• When you are in VCR mode, the POWER key controls the VCR device only.
• When you are in AUX mode, the POWER key controls the auxiliary device
only.
Controlling Power for One Device at a Time (Program Code 9 9 8)
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 8. The CBL key blinks twice.
3. Press SELECT to save your power settings. All mode keys blink three times.
After you select a mode, the POWER key controls the device assigned to that
mode.
For example, in TV mode, the remote controls power for the TV only.
Important Power Tips
• We strongly recommend that you program the remote to turn off the set-top
each time you turn off your TV.
• When you turn off the set-top using the remote control, you are actually
putting the set-top into a power saving mode. As long as the set-top
remains plugged in, it will continue to receive programming updates and, if
applicable, record programs and movies.
• If your POWER key controls multiple devices at once, the remote returns to
the CBL mode after the devices are powered on or off .
• If your POWER key controls multiple devices at once, you can override this
setting by pressing the desired mode key and then pressing POWER within
3 seconds. For example, if you press the VCR key and then the POWER key
within 3 seconds, the remote turns just the VCR on or off , regardless of the
programmed power settings.
12