Change Vcr/Vod Programming - Cisco AT8560 User Manual

Change VCR/VOD Programming

Your remote is originally programmed in one of the following ways:
• The Rewind, Play, Fast Forward, Stop, Pause, and Record keys (the transport
keys) are programmed, by default, to transmit the codes for the Explorer
8000 series Home Entertainment Server video-on-demand (VOD) or digital
video recorder (DVR) functions when in Cable (CBL) mode.
• The transport keys control diff erent devices, depending on the mode key you
press.
You can choose to override the default settings for the transport keys so that
the transport keys operate a diff erent device when you have selected CBL
mode.
Try your remote to see how the transport keys currently work. If you want to
change the settings for the transport keys, complete the procedure that fi ts
your needs.
Changing VCR/VOD Programming (Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press the mode key (VCR or DVD) associated with the device you want the
transport keys to now control. All mode keys blink three times.
Results:
• The transport keys now always control the device associated with the mode
you selected in this procedure (DVD or VCR).
• Pressing PLAY
reassigned to AUX.
• In AUX mode, the remote always controls channels for the device assigned
to the AUX key.
Restoring Default VCR/VOD Settings (Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press CBL. All mode keys blink three times.
Result: The transport keys are restored to their default settings.
Example: Pressing PLAY
starts the VCR, the DVD, or the device that has been
in CBL mode starts the DVR.
15