4.
5.
6.
Restoring the Default Settings
To restore the default factory settings to your HRG DVR:
1.
2.
Input the FTP server address.
Click Upgrade to begin the update process.
After the system firmware has been updated, reboot the HRG DVR to complete the update
process.
Note
If the HRG DVR fails to update, please contact your system supplier for further
assistance.
Click Menu
Maintenance
Figure
12-13).
Figure 12-13 Default Settings Menu
Click OK to restore the factory default settings.
Note
Network information such as IP address, subnet mask, and gateway will not be
restored.
Default to enter the Default Settings menu (see
HRG DVR Management | 107
800-12005 - A - 06/2012