Join The Wireless Network - NETGEAR DGN1000v3 Installation Manual

Join the Wireless Network

You can use either the Wi-Fi Protected Setup (WPS) method or the
manual method to join your wireless network.
 To join the network using WPS:
1. Press the WPS button on the modem router.
2. Within two minutes, press the WPS button on your wireless
computer or device, or follow the WPS instructions that came with
your wireless device to complete the WPS process.
Note: Some older wireless computers or devices cannot use WPS.
 To join the network manually:
1. On your computer or wireless device, open the software that
manages its wireless connections.
This software scans for all wireless networks in your area.
2. Look for the WiFi network name (SSID) and select it.
The SSID is on the label on the bottom of the modem router.
3. If you changed the name of your network during the setup process,
look for that network name.
4. Enter the preset password (or your custom password if you
changed it).
5. Click the Connect button.
12