Join The Wireless Network; Wps Method; Manual Method - NETGEAR D6300B Installation Manual

Join the Wireless Network

You can use either the Wi-Fi Protected Setup (WPS) method or the
manual method to join your wireless network.

WPS Method

WPS lets you join your WiFi network without typing the password.
If your wireless device supports WPS, the first time you join the
network, you might be prompted to press the WPS button on the
modem router.
1. Press the WPS button
2. Within 2 minutes, press the WPS button on the computer or
wireless device that is trying to join the network.
Follow the WPS instructions that came with your computer or
wireless device to join the network.
Note: Some older wireless computers or devices cannot use WPS.

Manual Method

1. On your computer or wireless device, open the software that
manages its wireless connections.
This software scans for wireless networks in your area.
2. Look for the WiFi network name (SSID) on the list and select it.
The SSID is on the label on the bottom of the modem router.
Note: If you changed the name of your network during the setup
process, look for that network name.
3. Enter the preset password (or your custom password if you
changed it), and click Connect.
on the modem router.
10