Join The Wifi Network - NETGEAR Nighthawk R7000 Installation Manual

Join the WiFi Network

You can either use Wi-Fi Protected Setup (WPS) or select your WiFi
network and type its password.
 To join the network using WPS:
1. Press the WPS button on the router.
2. Within two minutes, on your computer or wireless device, press its
WPS button or click its onscreen WPS button.
For help with the WPS button on your computer or wireless
device, check the instructions or online help that came with that
computer or device. Some older equipment cannot use WPS.
 To select your network and enter its password:
1. On your computer or wireless device, open the software that
manages its WiFi connections.
This software scans for WiFi networks in your area.
2. Find and select your WiFi network.
The WiFi network name and password are on the router's label.
3. Enter the WiFi password and click the Connect button.
7