Power Outage - GE 164D2966P087 Use And Care Manual

automatic oven timing functions to
work properly. The time of day
cannot be changed during a Timed
Bake or CLEAN cycle.
Timer
The [imer is a minute timer; it does
not control oven operations. The
maximum setting on the timer is 9
hours and 55 minutes.
11
DECREASE pad until desired time is reached.
If "TIMER" is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
to set the timer.
End of Cycle Tone
The End of Cycle tone is a series of 3 beeps followed by 1 beep every
seconds, press and hold the CLEAR/OFF pad for 1() seconds.
To return the signal that beeps every 6 seconds, press and hold the

Power Outage

After a power outage, when power is restored, the display will flash and
time shown will no longer be correct—for example, after a 5-minute power
interruption the clock will be 5 minutes slow.
All other functions that were in operation when the power went out will
have to be programmed again.
To Set the Clock
1. Press the
CLOCK pad.
CLOCK
To Set the Timer
1. Press the TIMER
ON/OFF pad.
TIMER
ON/OFF
2. Press the INCREASE or
DECREASE pad to set the
amount of time on the timer.
To Cancel the Timer
Press and hold the TIMER ON/OFF pad until the
word "TIMER" disappears from the display.
2. Press the
INCREASE or
DECREASE pad
to set the time
of day.
3. Press the CLOCK pad to start.
The timer will start automatically
within a few seconds of releasing
the INCREASE or DECREASE pad
The timer, as you are setting it,
will display hours and minutes
During the countdown, when the
timer reaches the last minute, the
display will change to seconds
only and a single beep will sound.