Oven Door; Probe - GE 164D2966P087 Use And Care Manual

PROBLEM
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR WILL
NOT OPEN
OVEN NOT CLEAN
AFTER CLEAN CYCLE
"door" APPEARS
IN THE DISPLAY
"OFF" APPEARS
IN THE DISPLAY
OVEN TEMPERATURE
TOO HOT OR TOO COLD
"BURNING" OR "OILY"
ODOR EMITTING FROM
OVEN WHEN TURNED ON
STRONG ODOR
FAN NOISE
If you need more help.. call, toll free:
GE Answer Center@
800.626.2000
consumer information service
38
THE PROBLEM SOLVER
(continued)
POSSIBLE CAUSE
reset the controls.
Probe is in the oven. Remove the probe.
Oven must cool below locking temperature.
Oven controls not set properly. See the Operating the Self-Cleaning Oven section.
Heavily soiled ovens require 3
Heavy spillovers should be cleaned up before starting clean cycle.
Oven
door not closed after Self-Clean cycle selected.
Door is still locked and you are trying to enter an oven cooking operation.
Oven is too hot
for Self-Clean.
Bake or Broil attempted too soon after Self-Clean.
Other oven is in Self-Clean.
Child Lockout feature is turned on.
set a self-clean cycle for a minimum of 3 hours. See the Operating the
Self-Cleaning Oven section.
first few times the oven is used. This is temporary.
and the fan may continue to run even after the oven is turned off.
to 4-hour Clean Time.
—