Pilot Event Marker - Honeywell PRIMUS 660 Pilot's Manual

R
PRIMUS 660 Digital Weather Radar System
Radar Indication With Text Fault Enabled (On Ground)

PILOT EVENT MARKER

At any time a full set of BITE parameters can be recorded by going in
and out of variable gain four times (pull GAIN knob for VAR, push for
preset, pull for VAR, and push for preset) within three seconds. There
is no annunciation on the display after this operation.
This feature can be useful if the radar appears to be malfunctioning and
a fail annunciation is not shown on the display. If the pilot event marker
is used, it is best to record several sets of data during the period of
misoperation. Refer to the PRIMUS
Installation Manual for information on constructing an interconnect
cable for accessing this information.
In–Flight Troubleshooting
8-4
Figure 8–3
R
660 System Description and
A28–1146–111
REV 2