Table of Contents
Advertisement
•
Domain Name Server. The Domain Name Server address that the router uses. A
Domain Name Server translates human-language URLs such as www.netgear.com into
IP addresses.
Statistics
The router provides various statistics.
To view the traffic statistics:
1.
Click the ADVANCED tab.
The Router Status screen displays.
2.
In the Internet Port pane, click the Show Statistics button.
A pop-up screen displays traffic statistics:
The following information displays:
•
System Up Time. The time elapsed since the router was last restarted.
•
Port. The statistics for the WAN (Internet) port, the four LAN (Ethernet) ports
combined, and the wireless LAN (WLAN) port.
•
Status. The link status of the port.
•
TxPkts. The number of packets transmitted on this port since reset or manual clear.
•
RxPkts. The number of packets received on this port since reset or manual clear.
•
Collisions. The number of collisions on this port since reset or manual clear.
•
Tx B/s. The current transmission (outbound) bandwidth that is used on the port.
•
Rx B/s. The current reception (inbound) bandwidth that is used on the port.
•
Up Time. The time elapsed since this port acquired the link.
•
Poll Interval. The interval at which the statistics are updated on this screen.
3.
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
the Set Interval button.
4.
To stop the polling entirely, click the Stop button.
N450 Wireless Router WNR2500
Monitoring
119
Advertisement
Table of Contents
