Edit Or Delete An Existing Qos Policy - NETGEAR N300 User Manual

5. From the Priority Category drop-down menu, select MAC Address, as shown in the
following figure:
6. If the device is in the MAC Device List, select its radio button.
The information from the MAC Device List populates the QoS Policy For, MAC Address,
and Device Name fields.
If the device is not in the list, click Refresh. If it still does not appear, fill in these fields
manually.
7. From the Priority drop-down menu, select the priority for Internet access for this device's
traffic relative to other applications and traffic.
The options are Low, Normal, High, and Highest.
8. Click Apply to save this rule to the QoS Policy table.

Edit or Delete an Existing QoS Policy

To edit or delete a QoS policy:

1. Select ADVANCED > Setup > QoS Setup.
The QoS Setup screen displays.
2. Click the Setup QoS Rule button.
3. Select the radio button next to the QoS policy that you want to edit or delete, and do one of
the following:
• Click Delete to remove the QoS policy.
• Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to
change the policy settings.
4. Click Apply.
Your changes are saved.
You can also delete all of the rules by simply clicking the Delete All button below the QoS
Policy table.
N300 Wireless Router JWNR2000v3
genie Advanced Home
54