Silica - Cisco 6030 Installation Manual

Installing the IP Camera with a Vandal Resistant Enclosure
While viewing video from the IP camera, perform the following steps to adjust the 3-axis field of view:
Step 10
Grip the two tilt adjustment screws and pan the IP camera left or right.
a.
Loosen the two tilt adjustment screws, tilt the IP camera, then tighten the screws.
b.
Rotate the IP camera to adjust the horizontal orientation until you achieve a level image.
c.
(Optional) If the IP camera is installed in a high humidity environment, remove the wrapper from the
Step 11
included silica gel pack and place the pack with the camera inside the VR housing. Ensure that the silica
gel pack does not obstruct the IP camera field of view.
Install the black cover.
Step 12
Attach the dome cover to the camera by aligning it with the mounting holes.
Step 13
Cisco Video Surveillance 6030 IP Camera Installation Guide
2-8
Chapter 2 Camera Installation
OL-28492-02