Chapter 2 Camera Installation; Warnings Before Installation - Cisco 6030 Installation Manual

Chapter 2 Camera Installation
Do not insert sharp or tiny objects into the
•
IP Camera.
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
The power supply must be placed indoors. Statement 331
Warning
Note
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source
Warning
or an IEC60950 compliant limited power source. Statement 353
Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or
a minimum 24AWG communication cable.
The power adapter that you use with the IP camera must provide power that is within +/–10% of the
Note
required power.
The equipment is to be connected to a Listed class 2, limited power source.
Note
OL-28492-02
If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA
enclosure.
Cisco Video Surveillance 6030 IP Camera Installation Guide

Warnings Before Installation

2-3