Figure 1-35 Removing An Actuator Button Sfp Or Sfp+ Module From A Port - Cisco ASR 9000 Series Installation Manual

Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Figure 1-35
Step 4 Grasp the actuator button between your thumb and index finger and carefully pull the SFP module from
the port.
Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if
Step 5
you plan to return it to the factory.
Protect your line card by inserting clean SFP module cage covers into the optical module cage when
Step 6
there is no SFP module installed.
OL-17500-08
Removing an Actuator Button SFP or SFP+ Module from a Port
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Installing and Removing SFP Modules
1
3
5
7
0
2
4
6
1
3
5
7
0
2
4
6
9
8
9
8
1-75