2-Port 100-Gigabit Ethernet Line Card - Cisco ASR 9000 Series Installation Manual

Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router
Ethernet Line Card Product Overviews
Table 1-4 summarizes the optics and connectors used by the 100-GE port on the 1-port 100-GE line card.
For more information, see the "Cabling Description" section on page 1-99

2-Port 100-Gigabit Ethernet Line Card

The 2-Port 100-GE line card provides two CFP cages for CFP Ethernet optical interface modules that
operate at a rate of 100 Gbps.
The two CFP modules can be 100-Gigabit Ethernet multimode connections (see Table A-6).
The 2-Port 100-GE line card is available in either an -SE (Service Edge Optimized) or -TR (Packet
Transport Optimized) version.
.All versions are functionally equivalent, but vary in configuration scale and buffer capacity.
Each CFP cage on the 2-Port 100-GE line card has an adjacent Link LED visible on the front panel. The
Link LED indicates the status of the associated CFP port, as described in Table 2-1.
Figure 1-10 shows the front panel and connectors of the 2-Port 100-GE line card.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-27
OL-17500-08