Page 1
Cisco Video Surveillance 6020 IP Camera Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28120-02...
Page 2
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
Viewing Live Video Managing the Local Storage 4-12 Downloading and Installing the Cisco SD Utility 4-13 Formatting the SD Memory Card 4-13 Downloading Encrypted Video Files from the SD Memory Card 4-14 Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 4
Contents Deleting Encrypted Video Files from the SD Memory Card 4-14 Decrypting Encrypted Video Files 4-15 N D E X Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Obtaining Documentation, Obtaining Support, and Security Guidelines For information about obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed...
Page 6
Preface Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
C H A P T E R Overview This chapter describes the Cisco Video Surveillance 6020 IP Camera, and includes the following topics: Introduction, page 1-1 • Package Contents, page 1-2 • • IP Camera Physical Details, page 1-3 Introduction The Cisco Video Surveillance 6020 IP camera is an indoor, high definition, professional fixed dome IP camera with industry-leading image quality and processing power.
Chapter 1 Overview Package Contents Package Contents The Cisco Video Surveillance 6020 IP Camera package includes the following items: Cisco Video Surveillance 6020 IP Camera (1) • Installation template and alignment sticker (1) • Wall anchors (3) • Screws (3) •...
Overview IP Camera Physical Details IP Camera Physical Details Figure 1-1 and the table that follows describe the physical features of the 6020 IP camera. Figure 1-1 IP Camera Details Light sensor Senses the level of ambient light to determine when to switch day/night mode.
Page 10
Accepts a standard LAN cable to connect the IP camera to a 10/100BaseT router or switch. 11 GPIO Terminal Block General purpose input/output (GPIO) terminal block that is used to connect external input and output devices. For more information, see Figure 1-2. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
GPIO Terminal Block Pin Locations and Descriptions Description DC 12V- DC 12V+ AC 24V_2 AC 24V_1 DI- (GND) DO+ (+12V) The maximum output load from pins 7 and 8 is 400mA. Note Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 12
Chapter 1 Overview IP Camera Physical Details Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
C H A P T E R Camera Installation This chapter provides information and instructions for installing the Cisco Video Surveillance 6020 IP Camera, and includes the following topics: Installation Guidelines, page 2-1 • Warnings Before Installation, page 2-1 •...
Page 14
Do not place the IP Camera in high sunlight. humidity environments. Do not place the IP Camera on unsteady Do not touch the IP Camera during a • • surfaces. lightning storm. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 15
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source Warning or an IEC60950 compliant limited power source. Statement 353 Inline power circuits provide current through the communication cable. Use the Cisco provided cable or Caution a minimum 24AWG communication cable.
Mounting the IP camera with a Vandal Resistant Enclosure, page 2-10 • Mounting the IP Camera Directly to a Surface To directly mount the 6020 IP camera to a surface, complete the following steps: Procedure Attach the included alignment sticker to the ceiling or wall.
Page 17
• The secondary video stream must is enabled. • Note We recommend that you disable analog video after installation. To disable analog video, see the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide. Remove the black cover. Step 7...
Page 18
After completing the initial setup, use the IP camera user interface to adjust the focal length and • zoom factor. For more information, see the “Adjusting the IP Camera Focus and Zoom” section on page 4-3. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Camera Installation IP Camera Installation Mounting the IP Camera Flush with a Surface To mount the 6020 IP camera flush with a surface, complete the following steps: Procedure Step 1 Secure the IP camera inside the camera housing using the two included screws.
Page 20
• The secondary video stream must is enabled. • Note We recommend that you disable analog video after installation. To disable analog video, see the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide. Remove the black cover. Step 10...
Page 21
Attach the security strap from the dome and trim ring assembly to the camera housing using the included Step 13 screw. Attach the dome and trim ring assembly by positioning its pegs in the slots of the camera housing and Step 14 twisting clockwise. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
4-3. Mounting the IP camera with a Vandal Resistant Enclosure To mount the 6020 IP camera using a vandal resistant (VR) enclosure, complete the following steps: Procedure Attach the included alignment sticker to the ceiling or wall. Step 1...
Page 23
(Optional) Use a mini cable with BNC connector to temporarily attach an NTSC or PAL compliant Step 8 analog video display device to the analog video out port on the IP camera. Cisco Video Surveillance 6020 IP Camera Installation Guide 2-11 OL-28120-02...
Page 24
• The secondary video stream must is enabled. • Note We recommend that you disable analog video after installation. To disable analog video, see the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide. Remove the black cover. Step 9...
Page 25
After completing the initial setup, use the IP camera user interface to adjust the focal length and • zoom factor. For more information, see the “Adjusting the IP Camera Focus and Zoom” section on page 4-3. Cisco Video Surveillance 6020 IP Camera Installation Guide 2-13 OL-28120-02...
Page 26
Chapter 2 Camera Installation IP Camera Installation Cisco Video Surveillance 6020 IP Camera Installation Guide 2-14 OL-28120-02...
To connect to the IP camera for the first time and make initial configuration settings, perform the following steps. You can change these configuration settings in the future as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.
Page 28
If you are prompted to install ActiveX controls, which are required to view video from the IP camera, Step 8 follow the on-screen prompts to do so. The Home window appears. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
C H A P T E R Camera Management This chapter provides information and instructions for managing the Cisco Video Surveillance 6020 IP Camera, and includes the following topics: Understanding the IP Camera User Interface, page 4-1 • Adjusting the IP Camera Focus and Zoom, page 4-3 •...
Method by which the IP camera obtains its IP address. LAN IP IP address of the LAN to which the IP camera is connected. Subnet Mask Subnet mask of the LAN to which the IP camera is connected. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
(Optional) Click Auto Focus to have the IP camera automatically adjust its focus. To automatically Step 7 adjust the focus to a particular region in the field of view, check the Specify Region check box and draw or select a region before clicking Auto Focus. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
3-1. Viewing Live Video After you install and set up the Cisco Video Surveillance IP Camera, you can connect to the IP camera through Internet Explorer and access the Camera Video & Control window to view live video. The Camera Video & Control window also provides for controlling the video display, configuring preset positions, and controlling certain IP camera functions.
Page 33
When you click this button, the Snapshot window appears. Click Save and follow the on-screen prompts to save the image with the name and in the location that you want. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 34
Microphone button. Click the Unmute Microphone button to unmute audio that is sent to the IP camera. The button changes to the Mute Microphone button. Restore button Resets audio controls to their default values. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 35
To control contrast of the video image, drag the slider, or enter a value from 1 through 10 and press the Enter key. A higher value increases the contrast and a lower value decreases the contrast. The default value is 5. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 36
Manual. Specifies the range of gain (amount of amplification applied to pixel values) settings to be used by the IP camera. You can adjust both ends of the gain control range. Default range is to 0 to 100. Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 37
DRX processing (low, medium, or high) to use for recovering washed out details. Gamma Curve Choose the value that provides the optimal gray-scale intensity. Larger gamma curve values make shadows darker and larger values make dark regions lighter. Motion detection Cisco Video Surveillance 6020 IP Camera Installation Guide OL-28120-02...
Page 38
50, click Restore. These configuration settings affect the cell that you select. If the cell is part of a group of horizontally or vertically (but not diagonally) adjacent cells, the settings affect all cells in the group. Cisco Video Surveillance 6020 IP Camera Installation Guide 4-10 OL-28120-02...
Page 39
The region is user configurable and can be moved around the screen. Reset button Resets the lens position and slider control positions to their default values (full wide and near). Cisco Video Surveillance 6020 IP Camera Installation Guide 4-11 OL-28120-02...
PC, or the SD memory card must be moved from the IP camera to your PC. The Cisco SD Utility allows you to manage the SD memory card and to decrypt the encrypted video data on the card. The utility can be downloaded from Cisco.com and installed on your PC. For more information see the “Downloading and Installing the Cisco SD Utility”...
The Download Software page appears. Choose your IP camera model from the list on the right. Click the Download button for the Cisco Video Surveillance 3000, 6000 and 7000 Series camera SD Utility (CiscoSDUtilityInstallerV1.0.0.zip). Log in and follow the on-screen prompts to download the file to your PC.
SD memory card using the FAT32 partition. Downloading Encrypted Video Files from the SD Memory Card Procedure Double-click the Cisco SD Utility icon to open the utility. Step 1 Enter the IP address and root password for the IP camera and click Connect.
Note the root password of the IP camera that created the encrypted video files. • Procedure Step 1 Double-click the Cisco SD Utility icon to open the utility. Step 2 Click the Decrypt tab. Do one of the following to specify the encrypted files that are to be decrypted: Step 3 In the Input file(s) text box, enter the full path and filename for each file to be encrypted.
Page 44
Chapter 4 Camera Management Managing the Local Storage Cisco Video Surveillance 6020 IP Camera Installation Guide 4-16 OL-28120-02...
Page 45
IP camera IP camera for the first time mounting to ceiling or wall 2-10 PC requirements for warnings contrast IP address default for IP camera obtaining from DCHP server Cisco Video Surveillance 6020 IP Camera Installation Guide IN-1 OL-28120-02...
Page 46
4-14 formatting 4-13 log out, of IP camera rebooting, IP camera Refresh link reset microphone factory default values muting PC reboot sensitivity motion detection accessing controls 4-7, 4-10, 4-12 saturation Cisco Video Surveillance 6020 IP Camera Installation Guide IN-2 OL-28120-02...
Page 47
Home window through third-party device or software See also live video video codec controls in Camera Video/Control window video resolution controls in Camera Video/Control window View Video link Cisco Video Surveillance 6020 IP Camera Installation Guide IN-3 OL-28120-02...
Page 48
Index Cisco Video Surveillance 6020 IP Camera Installation Guide IN-4 OL-28120-02...