Using The Bulk Deployment Utility - Cisco 7925G Deployment Manual

Using the Bulk Deployment Utility

The Bulk Deployment Utility (BDU) for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G enables the
creation of configuration files, which can be exported then enabled for TFTP download by the Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G.
A personal computer running Microsoft Windows® is required.
The Bulk Deployment Utility requires firmware 1.3(4) or later on the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G.
This utility does not support certificate provisioning, which would be required in order to support server validation for PEAP or
EAP-TLS.
The utility does allow PEAP to be configured, but without the server validation option.
The Bulk Deployment Utility supports up to 1000 entries per CSV for export. If more than 1000 phones are being deployed,
then multiple CSV files will need to be created and imported.
If doing a bulk export, the username and password is applied to network profile 1 only.
Before exporting the TFTP downloadable configuration files, a template must be created containing the Network Profile, USB,
Trace, and Wavelink settings.
Configure the Profile Name as necessary.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
104