Models - Cisco 7925G Deployment Manual

Models

There are four Cisco Unified Wireless IP Phone 7925G models, one Cisco Unified Wireless IP Phone 7925G-EX model, and
one Cisco Unified Wireless IP Phone 7926G model.
The Cisco Unified Wireless IP Phone 7925G and 7926G models are grey in color, where the Cisco Unified Wireless IP Phone
7925G-EX is yellow in color.
The regulatory domain can be identified by navigating to Settings > Model Information > WLAN Regulatory Domain and
then referencing the Regulatory Domain number in the table below.
The Cisco Unified Wireless IP Phone 7925G-EX, and Cisco Unified Wireless IP Phone 7926G are configured like the Cisco
Unified Wireless IP Phone 7925G –W model, which requires an 802.11d enabled access point.
Use the following tables to identify specific phone versions that support these regulatory domains for use around the world:
7925G
Part Number Regulatory
Domain
CP-7925G-A-K9 FCC
(Americas)
CP-7925G-E-K9
ETSI
(Europe)
CP-7925G-P-K9 Japan
CP-7925G-W-K9 Rest of
World
7925G-EX
Part Number Regulatory
Domain
Number
CP-7925G-EX-K9 5252
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
Regulatory Frequency Range
Domain
Number
1050 2.412 – 2.462 GHz
5.180 – 5.240 GHz
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.805 GHz
3051 2.412 – 2.472 GHz
5.180 – 5.700 GHz
4157 2.412 – 2.472 GHz
2.412 – 2.484 GHz
5.180 – 5.700 GHz
5252 Uses 802.11d to identify available channels and transmit
powers. Channels operating at 2.412 GHz - 2.484 GHz and
5.180 GHz - 5.805 GHz are supported.
Frequency Range Available
Channels
2.412 – 2.484 GHz 14
5.180 – 5.240 GHz 4
5.260 – 5.320 GHz 4
5.500 – 5.700 GHz 11
5.745 – 5.805 GHz 4
Available Channel Set
Channels
11 1-11
4 36,40,44,48
4 52,56,60,64
8 100-140
4 149,153,157,161
13 1-13
16 36-48,52-64,100-140
13 (802.11g) 1-13
14 (802.11b) 1-14
16 36-48,52-64,100-140
Channel Set
1-14
36,40,44,48
52,56,60,64
100-140
149,153,157,161
13