Ssid / Wlan Settings - Cisco 7925G Deployment Manual

Note: If clients from other regions are present and will attempt to associate with the wireless LAN, then ensure that World
Mode (802.11d) is enabled.
When using 802.1x authentication, it is recommended to implement CCKM to offer fast secure roaming.

SSID / WLAN Settings

It is recommended to have a separate SSID for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G.
However, if there is an existing SSID configured to support voice capable Cisco Wireless LAN endpoints already, then that
WLAN can be utilized instead.
The SSID to be used by the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G can be configured to only apply to
a certain 802.11 radio type.
It is recommended to have the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G operate on the 5 GHz band due
to have many channels available and not as many interferers as the 2.4 GHz band has.
Ensure that the selected SSID is not utilized by any other wireless LANs as that could lead to failures when powering on or
during roaming; especially if a different security type is utilized.
In order to utilize CCKM, enable WPA2 policy with AES encryption and 802.1x + CCKM for authenticated key management
type when the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G are running firmware version 1.3(4) or later in
order to enable fast secure roaming.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
62