Advertisement
<Initial Transmission>
• To perform the initial user registration for the data terminal after the initial settings
have been specified, connect to the Center so the initial information can be sent to
the data terminal.
NOTE
Call the Center by telephone before and after the initial transmission for verification. In
addition, after the transmission, check that the data (total counters, etc.) has been
sent correctly to the Center.
C4656P010CA
C4656P018CA
Line is busy.
Max. trial number reached.
Connection failed.
Connected.
End normal.
4004-7715-01
1. Click [Initial Transmission].
2. After the initial transmission is completed,
check that "End normal." appears on the
screen.
Messages
Not answering.
The other line is busy.
DT modem error.
Dialing.
DT Connection failed.
CF2001P
C4004P566CA
C4656P019CA
– 42 –
3. Click the Panel Reset key in the External
Panel Controller.
4002U103EA
4. Click [Fin. Time].
NOTE
This completes input of the Maintenance
Center settings. If the Billing Center settings
must be specified, perform it in the same
way.
RETURN
Advertisement
