Advertisement
Specifying Who Performs Replacements
NOTE
The message that appears a unit must be replaced can be changed to indicate
that either the user or the service representative must perform the replace-
ment. Select the appropriate settings depending on the type of servicing being
performed.
C4004P565CA
C4004P597CA
C4004P584CA
4004-7715-01
1. Check that the External Panel Controller
appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For
details about displaying the Tech. Rep. Mode
screen, refer to the Service Manual.)
2. Click [System Input].
3. Click [Unit Change].
CF2001P
C4004PU02CA
– 22 –
NEXT
NEXT
4. Click [User] or [Service] to select whether
each unit should be replaced by the user or
the service representative.
5. Click [END].
6. Click [Menu], and then click [Fin. Time].
Advertisement
