Table of Contents
Advertisement
Attaching the lower fixings
o Loosen the bracket screws on the bottom of the fridge door and
move them until they fit against the cupboard door.
o There will be a gap of a few millimetres between the fridge door
and the cupboard door, and it should be parallel with the appliance
door from top to bottom.
IMPORTANT: Ensure the doors are parallel with each other.
o The bottom of the cabinet door is aligned by slightly loosening the
fixing screws and adjusting the position of the fixing brackets.
Retighten the screws when you are satisfied with its position.
Complete door installation
* Repeat the process for the bottom door of the appliance,
allowing for a gap of 2-3 mm between the bottom of the fridge
décor door and the top of the freezer décor door. This will
affect the positioning of the fixing bracket.
o Fasten the fix
plate cover
into the top of
the door as
shown in the
diagram
opposite.
32
Advertisement
Table of Contents
