Baumatic BRCIF7535 266 Instruction Manual page 31

Adjusting the cabinet door
Using an appropriate tool:
o Twist the height adjustment screw to allow for about 5mm
movement in height.
Loosen the horizontal adjustment nut to allow for about 5mm
o
movement in width. Retighten the nut once in place.
Loosen the depth adjustment screw to allow for about 3mm
o
movement in depth. Retighten the screw once in place.
Take care to check the clearances on all sides of the door when
o
making adjustments to ensure that the door opens/closes without
interference.
Refit the locking nuts onto the top fix plate bolts and tighten,
o
ensuring the door alignment is still correct.
Once satisfied, you can then secure the door at the bottom using
o
the lower fixing brackets.
IMPORTANT: The lower fixing should only be attached when
the door is sitting centrally and horizontal.
o The nuts and screws on the top of the
fridge door that secure to the fixing
plate (cabinet door) are adjustable.
Once hanging, you can adjust the level
o
and centre of the door. The bolts which
the door/fixing plate hang on will
adjust approximately 5mm.
31