Cisco 3600 Series Installation Manual page 33

Chapter 5 Installing Memory in the Router
Replacing the Cisco 3660 Mainboard Tray
This section describes how to replace the mainboard tray. You need a number 2 Phillips screwdriver to
perform this procedure:
Place the chassis so the rear panel faces you.
Step 1
Hold the tray so that the tabs at the tray's lower corners are aligned with the ledge in the chassis opening.
Step 2
(See part 1 of
Figure 5-27 Replacing the Cisco 3660 Mainboard Tray
2
Step 3 Slide the mainboard tray into the chassis until firm contact is made with the backplane. (See part 2 in
Figure
Push the levers at the lower corners of the mainboard inward. (See part 3 in
Step 4
OL-2056-02
Figure 5-27.)
1
4
5-27.)
3
Cisco 3600 Series Hardware Installation Guide
Closing the Router
Figure 5-27.)
5-33