Cisco 7975G Software Manual page 74

If you want to...
Dial from a call log (while
not on another call)
Dial from a call log (while
connected to another call)
See if the line in the call
log is busy before placing
a call to that line
2
Then...
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record.
Note If the Details softkey appears, the call is the primary entry of a
multiparty call. See the
3. If you need to edit the displayed number, press EditDial followed by
<< or >>. To delete the number, press EditDial followed by Delete.
You may need to press the more softkey to display Delete.
4. Go off-hook to place the call.
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record.
If the Details softkey appears, the call is the primary entry
Note
of a multiparty call. See the
3. If you need to edit the displayed number, press EditDial followed by
<< or >>.
4. To delete the number, press EditDial followed by Delete. You may
need to press the more softkey to display Delete.
5. Press Dial.
6. Choose a menu item to handle the original call:
Hold—Puts the first call on hold and dials the second.
–
Transfer—Transfers the first party to the second and drops you
–
from the call. Press Transfer again after dialing to complete the
action.
Conference—Creates a conference call with all parties,
–
including you. Press Confrn or Conference again after dialing to
complete the action.
EndCall—Disconnects the first call and dials the second.
–
Look for Busy Lamp Field indicators. See
State, page 8.
Tips section below.
Tips section below.
Using BLF to Determine a Line
OL-22332-01