Using Cbarge; Using Meet-Me - Cisco 7975G Software Manual

Using cBarge

You can create a conference by using cBarge to add yourself to a call on a shared line.
If you want to...
Create a conference by
barging a call on a shared line
See a list of participants or
remove participants

Using Meet-Me

Meet-Me conferencing enables you to start or join a conference by calling the conference number.
If you want to...
Start a Meet-Me
conference
Join a Meet-Me
conference
End a Meet-Me
conference
Tip
If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the
message, "Device Not Authorized." For more information, see
page 9.
16
Then...
Press the line button for the shared line.
In some cases, you must highlight the call and press cBarge to
complete the action.
See Using Barge to Add Yourself to a Shared-Line Call, page 5
more information.
See Viewing or Removing Conference Participants, page
Then...
1. Obtain a Meet-Me phone number from your system administrator.
2. Distribute the number to participants.
3. When you are ready to start the meeting, go off-hook to get a dial tone, then
press MeetMe.
4. Dial the Meet-Me conference number.
Participants can now join the conference by dialing in.
Note Participants hear a busy tone if they call the conference before the initiator
has joined. In this case, participants must call back.
Dial the Meet-Me conference number (provided by the conference initiator).
Note You will hear a busy tone if you call the conference before the initiator has
joined. In this case, try your call again.
All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.
Making and Receiving Secure Calls,
for
17.
OL-22332-01