Cisco 7975G Software Manual page 42

If you want to...
Set up Call Forward All on
your primary line
Cancel Call Forward All on
your primary line
Verify that Call Forward
All is enabled on your
primary line
Set up or cancel call
forwarding remotely, or for a
non-primary line
Tips
• Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another phone, although your
system administrator may restrict the call forwarding feature to numbers within your company.
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call rings as usual.
• Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.
• Your phone may reject your attempt to set up Call Forward All directly on the phone if the target
number that you enter would create a call forwarding loop or would exceed the maximum number
of links permitted in a call forwarding chain.
• When you switch an in-progress call from your mobile phone to Cisco Unified devices that share
the same line (Session Handoff), the Call Forward feature is disabled on the Cisco Unified devices.
The Call Forward feature returns when the call ends.
12
Then...
Press CFwdALL or Forward All and enter a target phone number.
Press CFwdALL or Forward All.
Look for:
• The call forward icon above your primary phone number:
• The call forward target number in the status line.
1. Log in to your User Options web pages. (See
User Options Web Pages, page
2. Access your call forwarding settings. (See
Settings on the Web, page
Note When call forwarding is enabled for any line other than the
primary line, your phone does not provide you with
confirmation that calls are being forwarded. Instead, you must
confirm your settings in the User Options web pages.
Accessing Your
1.)
Controlling Line
7.)
OL-22332-01