Omega REC-12 Owners & Installation Manual page 8

Programmable Features (cont'd)
Feature #4 Doors unlock when trunk release is activated
Default setting: ON (press LOCK)
Option: OFF (press UNLOCK)
This feature will automatically unlock the doors whenever the trunk release is activated to offer
extra convenience. It can be turned off if the output is used for another function.
Feature #5 Door lock/unlock pulse timing
Default setting: 0.8 Second (press LOCK)
Options: 3 Seconds (press UNLOCK)
Double 0.8 Sec. Unlock Pulse (press TRUNK)
This feature adjusts the pulse length of the door lock/unlock outputs. The required setting is deter-
mined by your vehicle and this should only be configured by the installer.
Feature #6 Domelight relay output
Default setting: Domelight supervision (press LOCK)
Options: 4th Channel Single Pulse (press UNLOCK)
4th Channel Latch/Unlatch (press TRUNK)
2nd Parking Light Output (press
This feature changes the operation of the domelight supervision output. It can be configured as a
4th channel output for additional accessories if needed and you can select from a pulsed or latch-
ing output. It can also be configured as an additional light flash output for vehicles with split parking
light systems. This should only be configured by the installer.
14
...
)
Feature #7 Flashing light relay output
Default setting: Flashing lights (press LOCK)
Options: 5th Channel Single Pulse (press UNLOCK)
5th Channel Latch/Unlatch (press TRUNK)
Horn Honk Output (press
This feature changes the operation of the flashing light output. It can be configured as a 5th chan-
nel output for additional accessories if needed and you can select from a pulsed or latching output.
It can also be configured as a horn honk output for vehicles requiring a high amperage and/or posi-
tive output. This should only be configured by the installer.
Feature #8 Confirmation chirps
Default setting: Low volume (press LOCK)
Options: High volume (press UNLOCK)
On demand (press TRUNK)
...
OFF (press )
This feature configures the way the system's confirmation chirps operate. They are defaulted on
with low volume chirps. You can change it to have high volume, operate on demand, or stay perma-
nently off. On demand requires 2 presses of LOCK or UNLOCK to hear the confirmation.
Feature #9 Automatic starter disable
...
Default setting: OFF (press )
Options: 90 Seconds After Ignition OFF (press LOCK)
90 Seconds After Unlock By Transmitter (press UNLOCK)
...
)
continued->
15